Sample Cart
Language
Sample Cart
Language
UESD6V8L1F
ACTIVE

Key Specifications
Product Description
Features
Applications
Pin Configurations
Ordering Information
Key Specifications
  • Part Number

    UESD6V8L1F

  • Description

    Low Capacitance Single Line ESD Protection Diode Array

  • Status

    ACTIVE

  • SubFamily

    General Purpose Protection

  • Bi-/Uni-directional

    Uni-directional

  • Numbers of channels

    1

  • IEC 61000-4-2 contact (kV)

    ±8

  • IEC 61000-4-2 air (kV)

    ±15

  • VRWM(Max) (V)

    5

  • VBR(Min) (V)

    6

  • Clamping Voltage (V),IPP=5A, tP=8/20μs

    10.8

  • Peak pulse power (8/20 μs) (W)

    55

  • CJ(Max) (pF) at VR=0V, f=1MHz, IO to GND

    20

  • Package

    DFN2 1.0x0.6

  • Product Description

    The UESD6V8L1F ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA’s. They feature large cross-sectional area junctions for conducting high transient currents, offer desirable electrical characteristics for board level protection, such as fast response time, lower operating voltage, lower clamping voltage and no device degradation when compared to MLVs.

    The UESD6V8L1F ESD protection diode protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. The UESD6V8L1F is available in a DFN2 1.0×0.6 (Compatible with SOD882) package with working voltages of 5 volt.

    It gives designer the flexibility to protect one unidirectional line in applications where arrays are not practical. Additionally, it may be “sprinkled” around the board in applications where board space is at a premium. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge).

    UESD6V8L1F is fabricated using dual diffusion technology offer low junction capacitance (20pF), which is required in high speed signal protection application.

    Features

    - Transient Protection for Data to IEC 61000-4-2 (ESD) ±15kV (Air),±8kV (Contact)

    - Small Package for Use in Portable Electronics

    - Suitable Replacement for MLV’s in ESD Protection Applications

    - Protect One I/O or Power Line

    - Low Clamping Voltage

    - Stand-off Voltage: 5V

    - Low Leakage Current

    - Solid-State Silicon-Avalanche Technology

    - Small Body Outline Dimensions: 1.0mm×0.6mm

    Applications

    - Cell Phone Handsets and Accessories

    - Personal Digital Assistants (PDA’s)

    - Notebooks, Desktops and Servers

    - Portable Instrumentation

    - Cordless Phones

    - Digital Cameras

    - Peripherals

    - MP3 Players

    Pin Configurations
    Ordering Information
    Part NumberPackaging TypeMarking CodeShipping Qty
    UESD6V8L1FDFN2 1.0×0.6E25000pcs/7Inch Tape & Reel