ACTIVE
Part Number
UESD6V8S2B
Description
5V Dual Line ESD Protection Diode Array
Status
ACTIVE
SubFamily
General Purpose Protection
Bi-/Uni-directional
Uni-directional
Numbers of channels
2
IEC 61000-4-2 contact (kV)
±8
IEC 61000-4-2 air (kV)
±15
VRWM(Max) (V)
5
VBR(Min) (V)
6
Clamping Voltage (V),IPP=5A, tP=8/20μs
9.1
Peak pulse power (8/20 μs) (W)
140
CJ(Max) (pF) at VR=0V, f=1MHz, IO to GND
50
Package
SOT523
The UESD6V8S2B of TVS diode array is designed to protect sensitive electronics from damage or latch-up due to ESD and is for use in applications where board space is at a premium. It is unidirectional device and may be used on lines where the signal polarities are above ground, each device will protect up to two lines.
TVS diodes are solid-state devices feature large cross-sectional area junctions for conducting high transient currents, specifically for transient suppression. It offers desirable characteristics for board level protection including fast response time, low operating, low clamping voltage, and no device degradation.
The UESD6V8S2B may be used to meet the immunity requirements of IEC 61000-4-2, ±15kV air, ±8kV contact discharge and MIL-STD-883 METHOD 3015, ±8 kV HBM. The small package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and digital cameras.
- Transient Protection for Data to IEC 61000-4-2 (ESD) ±15kV (Air)，±8kV (Contact)
- MIL-STD-883 3015 (HBM) ±8kV
- Protect Two I/O Lines
- Working Voltages: 5V
- Low Leakage Current
- Low Operating and Clamping Voltage
- Solid-State Silicon-Avalanche Technology
- Cell Phone Handsets and Accessories
- Cordless Phones
- Personal Digital Assistants (PDA’s)
- Notebooks, Desktops and Servers
- Portable Instrumentation
- Digital Cameras
- Peripherals
- MP3 Players
| Part Number | Packaging Type | Marking Code | Shipping Qty |
|---|---|---|---|
| UESD6V8S2B | SOT523 | 5ZA | 3000pcs/7Inch Tape & Reel |
