The UM810 is ultra low current, cost effective system supervisory circuit designed to monitor the power supplies in digital systems. The device provides a reset signal to the host processor when necessary, offer excellent circuit reliability & low cost by eliminating external component and adjustment when used with +5V, +3.3V, +3.0V or other voltage powered circuits.

The reset output is driven active within 10祍 of power supply falling through the reset voltage threshold. Reset is keeping active for a minimum of 140ms after system power supply has risen above the reset threshold. Reset threshold suitable for operation with variety of supply voltage are available.

UM810 has an active-high reset output. The UM810 is optimized to reject fast transient glitches on the power supply line, and the reset output is guaranteed to be in the correct logic state for power supply VCC down to 1V.

The device consists of a voltage reference comparator, resistors for detector threshold setting, delay generator, output driver & hysteresis circuit. The reset threshold & time delay are fixed with high accuracy internally and does not require any external adjustment.

Low supply current of 3礎 (VCC=3V) makes UM810 ideal for low power application. The device is available in 3 Pin SOT323 or SOT23 packages.

- Wide Operation Voltage Range of 1V to 7V

- Typical Quiescent Current of 3μA

- No External Components

- 3-Pin Small SOT323 and SOT23 Packages

- VCC Transient Immunity

- Correct Logic Output Guaranteed to VCC=1.0V

- Precision VCC Monitor for 2.5V, 3.0V, 3.3V and 5.0V Supplies

- Available in One Output Configuration: Push-Pull High Active Reset Output

- Wide Operation Temperature: -40°C to +85°C

- CPU and Logic Circuit Reset

- Power Fail Detectors

- Computers

- Embedded Systems

- Battery-Powered Equipments

- Intelligent Instruments