ACTIVE
Part Number
UM1661
Description
24V Boost LED Driver with PWM dimming
Status
ACTIVE
Channnels
4
Topology
Sync Boost
Dimming Mode
PWM
Iout(Max) (A)
1.6
Vin(Min) (V)
2
Vin(Max) (V)
6
Vout (Min) (V)
-
Vout (Max) (V)
24
Type
Inductive
Switching Frequency (MHz)
2
Max Efficiency(%)
-
Operating Temperature Range (℃)
-40 to 85
Package
SOT23-6
The UM1661 PFM step-up DC/DC Converter drives white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices. It features allowing series connection of the white LEDs so that the LED currents are identical for uniform brightness. An enable input can be pulsed repeatedly to adjust LEDs brightness. The fast 500kHz to 2MHz operation frequency allows for smaller capacitor and inductor. Fault condition protection uses cycle-by-cycle current limiting to sense maximum inductor current and over-voltage protection. The 0.2V low reference voltage minimizes the power loss across the current sense resistor.
The converter can operate from 2V to 6V, and capable of delivering maximum 200mA output current at 4-LEDs application with 3V input voltage. Quiescent current drawn from power source is as low as 120uA. All of these features make UM1661 be suitable for the portable devices, which are supplied by a single battery.
- Up to 24V Output Voltage
- Wide Operation Range: 2V to 6V
- Maximum 2MHz Operating Frequency
- PWM Dimming Control
- Shutdown Current <1μA
- Current Limit Cycle-by-Cycle
- Low Current Sense Threshold: 200mV
- 24V Over Output Voltage Protection
- Compact SOT23-6 Package
- Compact Back Light Module块
- Power Source for LED
- Constant Current Source
| Part Number | Packaging Type | Marking Code | Shipping Qty |
|---|---|---|---|
| UM1661 | SOT23-6 | LE9 | 3000pcs/7Inch Tape & Reel |
