Sample Cart
Language
Sample Cart
Language
UM1001
ACTIVE

Key Specifications
Product Description
Features
Applications
Pin Configurations
Ordering Information
Key Specifications
  • Part Number

    UM1001

  • Description

    2-Line RC EMI Filter with Integrated ESD Protection for Speaker Ports

  • Status

    ACTIVE

  • Filter Type

    CRC Filter, Audio Filter

  • Numbers of channels

    2

  • VRWM(Max) (V)

    5

  • IR(Max) (uA ) at VRWM(Max), 25°C

    5

  • VBR(Min) (V)

    6

  • IEC 61000-4-2 contact (kV)

    ±8

  • IEC 61000-4-2 air (kV)

    ±15

  • L (nH)

    0

  • R (Ohm)

    10

  • CTOT(Max) (pF) at VR=2.5V, f=1MHz, IO to GND

    -

  • CTOT(Max) (pF) at VR=0V, f=1MHz, IO to GND

    20

  • f3dB(Mhz), Cut-Off Frequency

    -

  • Attenuation @ 800 MHz (dB)

    -24

  • Attenuation @ 2.5 GHz (dB)

    -10.5

  • Package

    SOT23-6

  • Product Description

    The UM1001 is a low pass filter array with integrated TVS diodes for ESD protection. It is designed to provide unidirectional filtering of EMI/ RFI signals and electrostatic discharge (ESD) protection in portable electronic equipment. This state-of-the art device utilizes solid-state silicon-avalanche technology for superior clamping performance and DC electrical characteristics. They have been optimized for use on a USB port in cellular phone and other portable electronics.

    The UM1001 effectively replaces 10 discrete components in a small SOT23-6 package to provide ESD protection and EMI filtering. This small package will protect and filter up to two lines. This small outline makes the device especially well suited for portable applications.

    The TVS diodes are unidirectional for supporting unipolar signals without distortion. The TVS diodes provide effective suppression of ESD voltages in excess of 15kV (air discharge) and 8kV (contact discharge) per IEC61000-4-2, level 4.The device has very low insertion loss in the pass band (to approximately 10MHz) and high attenuation at frequencies ranging from 800MHz to 3GHz. Each line features two stages of TVS diode protection. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation.

    Features

    - Transient Protection for Data Lines to IEC 61000-4-2 (ESD) ±15kV (Air),±8kV (Contact)

    - Unidirectional EMI/RFI Filter with Integrated ESD Protection

    - Protects Two I/O Lines

    - Working Voltage: 5V

    - Low Leakage Current

    - Low Operating and Clamping Voltages

    - Solid-State Silicon-Avalanche Technology

    Applications

    - Web-Pads & Handhelds

    - Notebook

    - Portable Instrumentation

    - Industrial Interface

    - Treadmill

    Pin Configurations
    Ordering Information
    Part NumberPackaging TypeMarking CodeShipping Qty
    UM1001SOT23-6U023000pcs/7Inch Tape & Reel