Sample Cart
Language
Sample Cart
Language
UM74AVC2T245
ACTIVE

Key Specifications
Product Description
Features
Applications
Pin Configurations
Ordering Information
Key Specifications
  • Part Number

    UM74AVC2T245

  • Description

    2-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs

  • Status

    ACTIVE

  • Bits (#)

    2

  • Max Data Rate (Mbps)

    400

  • Direction Control

    Controlled

  • VCCA(Min) (V)

    1

  • VCCA(Max) (V)

    3.6

  • VCCB(Min) (V)

    1

  • VCCB(Max) (V)

    3.6

  • Output Type

    Push-Pull

  • Operating Temperature Range (℃)

    -40 to 125

  • Package

    QFN10 1.8x1.4

  • Product Description

    The UM74AVC2T245 is designed for asynchronous communication between two data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level of the direction-control inputs (DIR1 and DIR2). The output-enable (/OE) input can be used to disable the outputs so the buses are effectively isolated. The UM74AVC2T245 control pins (DIR1, DIR2 and /OE) are supplied by VCCA.

    The device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down. The VCC isolation feature is designed so that if either VCC input supply is below 100mV, all level shifter outputs are disabled and placed into a high impedance state. To put the device into the high-impedance state during power up or power down, tie /OE to VCC through a pull-up resistor; the current-sinking capability of the driver determines the minimum value of the resistor.

    Features

    - Control inputs VIH/VIL levels are referenced to VCCA voltage

    - VCC isolation feature – if either VCC input is at GND, all are in the high-impedance state

    - Fully configurable dual-rail design allows each port to operate over the full 1V to 3.6V power supply range

    - IOFF supports partial power-down mode operation

    - Up to 400Mbps support when translating from 1.8V to 3.3V

    - Latch-up performance exceeds 200 mA per JESD 78

    - ESD protection

    -- ±8kV Human body model

    -- ±2kV Charged-device model

    Applications

    - Enterprise and communications

    - Industrial

    - Personal electronics

    - Wireless infrastructure

    - Building automation

    - Point of sale

    Pin Configurations
    Ordering Information
    Part NumberPackaging TypeMarking CodeShipping Qty
    UM74AVC2T245QAQFN10 1.8×1.4C23000pcs/7Inch Tape & Reel