ACTIVE
Part Number
UMCAN1057E
Description
High-speed CAN transceiver with EN control and Silent Mode
Status
ACTIVE
Mode
Normal, Silent, Shutdown
Protocols
CAN, CAN FD
Bus fault voltage(V)
-40 to +40
Supply Voltage Range (V)
4.5 to 5.5
Logic Supply Voltage Range (V)
-
Max Data Rate(Mbps)
5
Operating Temperature Range(℃)
-40 to 125
Package
SOP8
The UMCAN1057E is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The UMCAN1057E offers improved ElectroMagnetic Compatibility (EMC) and ElectroStatic Discharge (ESD) performance, and also features:
• Ideal passive behavior to the CAN bus when the supply voltage is off.
The UMCAN1057E implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s. These features make the UMCAN1057E an excellent choice for all types of HS-CAN networks, in nodes that do not require a standby mode with wake-up capability via the bus.
- ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant
- Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase
- Suitable for 12V system
- EN input on UMCAN1057ES8 allows the microcontroller to switch the transceiver to a very low-current Off mode
- Transceiver disengages from the bus when not powered up (zero load)
- High ElectroStatic Discharge (ESD) handling capability on the bus pins
- Transmit Data (TXD) dominant time-out function
- Undervoltage detection on pins VCC
- Thermally protected
- Automotive Industry
- Industrial Control
- Wireless Infrastructure
| Part Number | Packaging Type | Marking Code | Shipping Qty |
|---|---|---|---|
| UMCAN1057ES8 | SOP8 | 1057ES8 | 3000pcs/13Inch Tape & Reel |
