Sample Cart
Language
Sample Cart
Language
UM7222B
ACTIVE

Key Specifications
Product Description
Features
Applications
Pin Configurations
Ordering Information
Key Specifications
  • Part Number

    UM7222B

  • Description

    High-Speed USB2.0 (480 Mbps) DPDT Switch With Single Enable

  • Status

    ACTIVE

  • Channels

    2

  • Architecture

    DPDT

  • Signal Type

    Differential

  • VCC(Min)(V)

    1.65

  • VCC(Max)(V)

    5.5

  • Bandwidth@-3dB (MHz)

    550

  • RON(typ) (Ω)

    9

  • CON(typ) (pF)

    12

  • Typical Application

    USB2.0

  • Operating Temperature Range(℃)

    -40 to 125

  • Package

    QFN10 1.8x1.4

  • Product Description

    The UM7222B is a high-speed, double-pole/ double-throw DPDT, low-power data switch optimized for USB 2.0 signal switching. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It handles bidirectional signal flow, achieving a 550 MHz -3dB bandwidth, and a port to port crosstalk and isolation at -50dB at 250MHz.

    The UM7222B operates from a single 1.65V to 5.5V supply, with current consumption less than 1 μA. Its high channel-to-channel crosstalk rejection results in minimal noise interface. Its bandwidth is wide enough to pass high-speed USB 2.0 differential signals (480Mbps). The control logic threshold is guaranteed to be compatible with 1.8V logic.

    The UM7222B is available in Pb-free QFN10 package (1.4mm×1.8mm×0.55mm). The device is ideal for handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os.

    Features

    - Power Supply: 1.65V to 5.5V

    - D+ and D- pins tolerate up to 5.5V

    - 1.8V compatible control-pin inputs

    - RON is Typically 9Ω at VCC=3.0V

    - Low Bit-to-Bit Skew: 50ps (Typ)

    - -3dB Bandwidth: 550MHz (Typ)

    - Power OFF Protection:

    -- When VCC=0V, D+ and D- can Tolerate up to 5.5V

    - Low Crosstalk: -50dB (250MHz)

    - Low Current Consumption: <1µA

    - Low Propagation Delay: 1.3ns

    - ESD Rating: ±8kV all pins

    - QFN10 1.8×1.4 Package

    Applications

    - Differential Signal Data Routing

    - USB2.0 Signal Routing

    - Portable Electronics

    - Consumer Products

    Pin Configurations
    Ordering Information
    Part NumberPackaging TypeMarking CodeShipping Qty
    UM7222BQFN10 1.8×1.4AC3000pcs/7Inch Tape & Reel