Sample Cart
Language
Sample Cart
Language
UM3257
ACTIVE

Key Specifications
Product Description
Features
Applications
Pin Configurations
Ordering Information
Key Specifications
  • Part Number

    UM3257

  • Description

    Low-Voltage, High Bandwidth, Dual SPDT Analog Switch

  • Status

    ACTIVE

  • Channels

    2

  • Architecture

    SPDT

  • Signal Type

    Single

  • VCC(Min)(V)

    1.65

  • VCC(Max)(V)

    5.5

  • Bandwidth@-3dB (MHz)

    250

  • RON(typ) (Ω)

    10

  • CON(typ) (pF)

    18.5

  • Typical Application

    GPIO

  • Operating Temperature Range(℃)

    -40 to 85

  • Package

    DFN12 3.0x1.6

  • Product Description

    The UM3257 is dual SPDT analog switch fabricated with silicon gate CMOS technology. It achieves very low propagation delay and RDS(ON) resistances while maintaining CMOS low power dissipation. These make it ideal for portable and battery power applications.

    The switch conducts signals within power rails equally well in both directions when on, and blocks up to the power supply level when off. Break-before-make is guaranteed.

    The select pin has over-voltage protection that allows voltages above VCC, up to 6.5V to be present on the pin without damage or disruption of operation of the part, regardless of the operating voltage.

    The UM3257 can maintain low power consumption for rail-to-rail signaling as long as the control signal input is held at a level that is greater than VIH minimum and less than VIL maximum by improving the control circuitry input buffer. so the part can be used in mixed voltage rail environments, especially services the mobile handset applications very well allowing for the direct interface with baseband processor general purpose I/Os, and it is no longer necessary to have the control input equal to VCC to maintain low power consumption.

    The UM3257 is in a 12-pin, ROHS compliant, DFN12 package. It measures 3.0×1.6mm. The leads are spaced at a pitch of 0.5mm and are finished with lead free Ni-Pd. The small package makes it ideal for use in portable electronics such as cell phones, digital cameras and PDAs.

    Features

    - Lower ICC when the S Input is within the Required VIH and VIL Bounds

    - Low ON-State Resistance (10Ω)

    - Control Inputs are 5V Tolerant

    - Low Charge Injection

    - Excellent ON-State Resistance Matching

    - Low Total Harmonic Distortion (THD)

    - 1.65V to 5.5V Single-Supply Operation

    - ESD Performance:

    -- Human Body Model>2kV

    -- Machine Model>200V

    - DFN12 Package

    - Pb-Free Package

    Applications

    - Sample-and-Hold Circuits

    - Battery-Powered Equipment

    - Audio and Video Signal Routing

    - Communication Circuits

    Pin Configurations
    Ordering Information
    Part NumberPackaging TypeMarking CodeShipping Qty
    UM3257DFN12 3.0×1.632573000pcs/7Inch Tape & Reel