Home > Products > Power Supply > Switching Regulators > LED Lighting Buck Driver
Datasheet Reliability Report Package Information Order Sample  
Key Specifications
Part Number Description Status Input Voltage(Type) Vin(Min)(V) Vin(Max)(V) Iout(Max)(A) Vout(Min)(V) Vout(Max)(V) Regulated Outputs(.) Topology Dimming Method Power Factor Correction(Min) Special Features Operating Temperature Range(℃) Pin/Package EV Kit Available?
UM1351S 35V 0.7A LED Driver with Internal Switch ACTIVE DC/DC 6 35 0.7 - 35 1 Buck Analog, PWM N/A Enable/Shutdown, Soft-start, Thermal Shutdown, Integrated Switch -40 to 85 5/SOT23
View All>>
Product Description
The UM1351 is a PWM step-down converter with internal power switch, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The UM1351 can drive up to 8 series connected LEDs. The device operates from an input supply between 6V and 35V and employs hysteretic control with a high side current sense resistor to set the constant output current up to 700mA. The device is well suited for applications requiring a wide input range. The high side current sensing and an integrated current sensing circuitry minimize the number of external components while delivering an accurate average output current. Depending upon supply voltage and external components, this device can provide up to 24 watts of output power.
Output current can be adjusted below the set value, by applying an external control signal to the VSET pin. The VSET pin will accept either a DC voltage or a PWM waveform. Dedicated pulse width modulation (PWM) input enables pulsed LED dimming over a wide range of brightness levels. A hysteretic control method ensures excellent input supply rejection and fast response during load transients and PWM dimming.
Applying a voltage of 0.2V or lower to the VSET pin turns the output off and switches the device into a low current standby state.
The UM1351 comes in small SOT89-5 and SOT23-5 packages. It is ideal for industrial and general lighting applications.
- Hysteretic Control with High Side Current Sensing
- Integrated 35V 0.5Ω NDMOS
- Up to 98% Efficiency
- Wide Input Voltage Range: 6V to 35V
- ±5% LED Current Accuracy
- Adjustable Constant LED Current
- Analog or PWM Control Signal for PWM Dimming
- Over Temperature, Open Circuit LED Protection
- Up to 1MHz Switching Frequency
- Pb-Free SOT89-5 and SOT23-5 Packages
Typical Application Circuit

- Low Voltage Halogen Replacement LEDs
- Low Voltage Industrial Lighting
- LED Back-Side Lighting
- Illuminated Signs
- DC/DC or AC/DC LED Driver Application
- General Purpose, Constant Current Source
Pin Configurations  

Ordering Information
Part Number
Packaging Type
Marking Code
Shipping Qty
Tape & Reel
@2014 Union Semiconductor Limited. All rights Reserved. 沪ICP备09013408