Home > Products > Discrete Device > TVS Diode Array > USB Port and Ethernet Port Protection
Datasheet Reliability Report Package Information Order Sample  
Key Specifications
Part Number Description Status SubFamily Transient Standards P (W) at 8/20 usec VRWM MAX (V) IR MAX at VRWM uA at 25°C VBR MIN (V) VPT MIN (V) CTOT MAX (pF) L-G at VR = 0V Lines: Uni-directional Protection Lines: Bi-directional Protection Pin/Package EV Kit Available?
UESD6V8V4B 4-Line ESD Protection Diode Array for High Speed Line Protection ACTIVE USB and Ethernet Protection IEC 61000-4-2 150 5 2 6 2 4 0 6/SOT563
View All>>

Product Description  

UESD6V8V4X are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to data and transmission lines from over-voltage caused by ESD (electrostatic discharge).
The unique design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components.
The low capacitance array configuration allows the user to protect four high-speed data or transmission lines. The low inductance construction minimizes voltage overshoot during high current surges. This device is optimized for ESD protection of portable electronics. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (± 15kV air, ± 8kV contact discharge).
 
Features
 
- Transient Protection for High-Speed Data Lines to
  IEC 61000-4-2 (ESD) ±15kV (Air), ±8kV (Contact)
- Array of Surge Rated Diodes with Internal TVS Diode
- Protects Up to Four I/O Lines & Power Line
- Low Capacitance for High-Speed Interfaces
- Low Leakage Current and Clamping Voltage
- Low Operating Voltage: 5.0V
- Solid-State Silicon-Avalanche Technology
 
Applications
 
- USB 2.0
- USB OTG
- Monitors and Flat Panel
- Displays Digital Visual Interface (DVI)
- High-Definition Multimedia Interface (HDMI)
- SIM Ports IEEE 1394 Firewire Ports
 
Pin Configurations  

 
 
Electrical Characteristics

Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
Reverse Stand-Off Voltage
VRWM
 
 
 
5.0
V
Reverse Breakdown Voltage
VBR
IT=1mA, Pin 5 to 2
6.0
 
 
V
Reverse Leakage Current
IR
VRWM=5V, T=25°C
Pin 5 to 2
 
 
2
µA
Clamping Voltage
VC
IPP=1A, 8/20µs
Any Pin to Pin 2
 
 
15
V
Clamping Voltage
VC
IPP=6A, 8/20µs
Any Pin to Pin 2
 
 
25
V
Junction Capacitance
Cj
VR=0V, f=1MHz
Any I/O Pin to Pin 2
(Note 1)
 
 
2
pF
VR=0V, f=1MHz
Between I/O Pins (Note 1)
 
 
1
pF
 
Note 1: I/O pins are pin 1, 3, 4, and 6
 
Ordering Information

Part Number
Working Voltage
Packaging Type
Channel
Marking Code
Shipping Qty
UESD6V8V4B
5.0V
SC89-6/
SOT563/
SOT666
4
UBF
3000pcs /7Inch
Tape & Reel
 
@2014 Union Semiconductor Limited. All rights Reserved. 沪ICP备09013408
FOLLOW US