首页 > 英联产品 > 接口 > RS485接口
UM3487EEPA
3.3V供电,热插拔,极性自动翻转的半双工RS485收发器
Datasheet Reliability Report Package Information Order Sample  
Key Specifications
Part Number Description Status Supply Voltage(Nom)(V) No. of TX No. of RX Duplex Signaling Rate(Max)(Mbps) ESD Contact (kV) ESD Air (kV) Number of Nodes Common Mode Range(V) Fail Safe ICC(Max) (mA) Operating Temperature Range(℃) Pin/Package EV Kit Available?
UM3487EEPA 3.3V供电,热插拔,极性自动翻转的半双工RS485收发器 Active 3.3 1 1 Half 2.5 ±8 ±15 256 -7 to 12 Idle, Open, Short 0.7 -40 to 85 8/DIP
View All>>
Product Description
 
The UM3487E series are +3.3V powered ±15kV ESD protected, fail-safe, hot-swappable, auto polarity reversal RS-485 transceivers. The device includes fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open, shorted or idle. This means that the receiver output will be logic high if all transmitters on a terminated bus are disabled (high impedance). The UM3487E features reduced slew-rate driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing error-free data transmission up to 500kbps. All transmitter outputs and receiver inputs are protected to ±8kV using the Human Body Model and ±15kV using the IEC61000-4-2, Air-Gap Discharge.
The UM3487E includes cable auto-invert functions that reverse the polarity of the RS485 bus pins in case the cable is misconnected. Receiver’s full fail-safe features are maintained even when the receiver polarity has been reversed.
The transceivers typically draw 300μA of supply current when unloaded, or when fully loaded with the drivers disabled. The device has a 1/8-unit-load receiver input impedance that allows up to 256 transceivers on the bus and is intended for half-duplex communications.
 
Features
 
- Automatic Polarity Reversal RS-485 Transceivers
- I/O logic compatible with +5V, +3.3V & +1.8V logic
- ESD Protection for RS-485 I/O Pins
  ±15kV—IEC61000-4-2, Air-Gap Discharge
  ±8kV—IEC61000-4-2, Contact Discharge
- True Fail-Safe Receiver
- Enhanced Slew-Rate Limiting
- –7V to +12V Common-Mode Input Voltage Range
- Allows up to 256 Transceivers on the Bus
- Thermal Shutdown
- Current-Limiting for Driver Overload Protection
 
Typical Operating Circuits
 

 
Pin Configurations
 


Applications
 
-Smart Meters/Automated Meter Reading Systems
-Industrial-Control Local Area Networks
-PROFIBUS® and Other RS-485 Based Field Bus Networks
-Building Lighting and Environmental Control Systems
-High Node Count RS-485 Systems
-Transceivers for EMI-Sensitive Applications
 
Communication Function Table
 
Table1. Transmitting                       

INPUTS
OUTPUTS
/RE
DE
DI
A
B
X
H
H/O
H
L
X
H
L
L
H
L
L/O
X
Z
Z
H
L/O
X
Shutdown

Table2. Receiving

INPUTS
OUTPUTS
/RE
DE
VID=VA-VB
RO
L
X
≥-50mV
H
L
X
≤-200mV
L
L
X
Open/Shorted
H
H
H
X
Z
H
L
X
Shutdown

 
 
 
 
 
 
 
 

H: High, L: Low, X: Do not care, Z: High impedance.
VA: Input Voltage of RS485 Non-Inverting Bus I/O terminal, VB: Input Voltage of RS485 Inverting Bus I/O terminal.
 
Ordering Information

Part Number
Marking Code
Operating Temperature
Package Type
UM3487EEPA
UM3487EEPA
-40°C to +85°C
DIP8
 

 

 
Application Notes
微处理器超长启动周期中的外部看门狗管理方案v2.pdf
利用3.3V供电RS485接口实现远距离数据通信.pdf
高速低电源电压逻辑电平转换电路.pdf
超低功耗LDO线性稳压器.pdf
I2C-BUS电平转换芯片在安防产品的应用.pdf
0201超小封装ESD保护器件.pdf
Analog Switch Permits Port Sharing in Portable Equipment.pdf
Balanced Modulator Demodulator Employing UM4684.pdf
Level Shifter for High Speed and Wide Voltage Range Interface.pdf
Low Resistance Analog Switches Permit Speaker Switching in Audio Devices.pdf
Low-Icct Analog Switches for Ultra-Portable Designs.pdf
Selecting the Right CMOS Analog Switch.pdf
Product Selection Guide
Interface and System Interconnect Selection Guide.pdf
Product Search
Parametric Search
Product You Recently Viewed
@2014 Union Semiconductor Limited. All rights Reserved.
FOLLOW US